Hyundai Accent Tie Rods
We source tie rods for every Accent generation sold in South Africa, then check the fit against your VIN before it leaves the warehouse
What Are Hyundai Accent Tie Rods?
Tie rods carry rack movement out to the wheel: an inner rod threaded into the rack itself, and an outer end at the knuckle. Which rack you have changes the part. The older hydraulically assisted Hyundais — the Getz, the earlier Accent and Atos, the Terracan — use a different arrangement to the newer electrically assisted cars where the motor sits on the column or the rack. Outer ends nearly always go first, and they announce themselves: the boot splits, the grease escapes, and the joint knocks on lock. Once the boot is open the clock is running, whatever the mileage says.
Signs You Need New Tie Rods
Before you order tie rods for a Accent
Does one tie rods listing cover every Accent?
No. Accent owners are usually surprised by how much turns on the generation code — X3, LC, MC and RB all sold here.The Accent ran for so long in South Africa that the same name covers four distinct platforms — the change from the Alpha to the Gamma petrol family is the single biggest fitment dividing line.
Which engine is in my Accent?
SA-market cars were sold with Alpha 1.5/1.6 (X3, LC), Alpha II 1.6 (MC), Gamma 1.6 (RB) and U-line 1.5/1.6 CRDi on selected RB-era derivatives. The code stamped on the block settles it — the badge on the boot does not.
What do you need from me to quote tie rods?
The generation code and whether the car is front- or all-wheel drive. South African road surfaces punish suspension harder than the markets these cars were tuned for, and the SUVs in the range carry noticeably different rear geometry between two-wheel- and all-wheel-drive derivatives.
In South Africa the Accent is mostly one of the deepest used-parts pools of any Hyundai in the country, which is exactly why sourcing to the correct generation matters more here than on a newer car. That is the wear pattern we stock and source against.
Accent Tie Rods: Common Questions
Will tie rods from another Accent fit mine?
Not automatically. The Accent sold in South Africa as X3, LC, MC and RB, and the Accent ran for so long in South Africa that the same name covers four distinct platforms — the change from the Alpha to the Gamma petrol family is the single biggest fitment dividing line. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
Can you source tie rods for the Accent if local stock is dry?
Usually, yes. The Accent the RB generation is a close relative of the Kia Rio of the same era, which gives us a second catalogue to search when Hyundai-listed stock runs out. We will tell you what we are quoting rather than leaving you to guess.
Inner or outer tie rod — which has gone?
The outer, usually. It screws onto the inner and connects to the wheel knuckle, and it is exposed, so its ball joint boot splits and the grease escapes. Inners thread into the rack under the rubber gaiter and generally only fail once that gaiter has torn and let dirt in. Two different parts and two different jobs.
How do I check a tie rod end on a Hyundai?
Grab the tyre at 9 and 3 o'clock and rock it firmly. Play with a knock means an outer tie rod, an inner CV joint or a lower ball joint — the test narrows it to three, and a hoist inspection settles which. Supporting symptoms are a clunk on turns, feathered front tyre wear and a squeak at parking speeds.
What does a tie rod end cost for a Hyundai?
Our supplier network stocks Hyundai Getz, Accent and Tucson right-hand tie rod ends from around R240. Do them in pairs. Request a free quote with your model and generation for both-sides parts plus fitting and the alignment.
Is a worn tie rod safe to drive on?
At low speed for a short time, yes. Beyond that, no — a worn tie rod can separate at the ball joint, and losing steering on one wheel at motorway speed is a crash rather than a breakdown. Book it within a week of noticing the clunk, not within a month.
Does the car need aligning afterwards?
Always. The tie rod sets the toe angle, so disturbing it means a four-wheel alignment to reset. Skip it and the new tyres are scrubbed out within weeks and the car pulls constantly. Build the alignment into the quote from the start rather than treating it as optional.
Tell us which Accent you have
The Accent sold here as X3, LC, MC and RB, and they do not share one parts list. Give us the generation code and we will do the rest.