Hyundai Azera Flex Pipe

Not automatically. The Azera sold in South Africa as TG, and the Grandeur name on imported documentation refers to the same car, which is worth knowing when a listing does not say "Azera". Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.

The VIN is the single most useful thing — a photo of the plate is fine. Failing that, the generation code and the engine code off the block. The Azera ran as TG, so the generation is what narrows the search.

It is the braided, corrugated section just behind the manifold or downpipe that absorbs engine movement so the rest of the exhaust does not have to. Because it is the part doing the flexing, it is the part that fatigues — on Getz and Accent CRDi cars it is reliably the first exhaust section to go.

A loud blow or tick that gets worse when you lift off the throttle, exhaust smell reaching the cabin, and vibration you can feel through the floor. Underneath, the braided mesh visibly frays before it fully lets go, so it usually gives you warning if anyone looks.

Once the mesh has torn or the inner corrugated core has cracked, a weld rarely holds — it fails again at the weld boundary within weeks, and you have paid twice. We cut the old section out and weld a fresh flex in. The replacement cost is modest enough that the repair is false economy.

Generic flex pipes run R190 to R850 through our supplier network — the budget end being mild steel and the top end stainless — and Hyundai-specific units are also available. Labour is one to two hours for the cut-and-weld. Ask for a fitted quote rather than a parts price.

It is the first thing to check, because with no flex absorbing engine movement the vibration goes straight into the system and the body. Failed engine mounts and a loose heat shield produce something similar, so get all three looked at on the ramp — the flex inspection itself takes about two minutes.