Hyundai Getz Exhaust Manifold
Exhaust Manifold for the Hyundai Getz — new, used and aftermarket stock, quoted once we know which Getz you are running
What Are Hyundai Getz Exhaust Manifold?
The exhaust manifold collects gas from each cylinder of your Hyundai and channels it into the front pipe or turbo. On 1.6 CRDi and 1.6 T-GDi engines the cast-iron manifold is prone to hairline cracks after 150,000 km of thermal cycling — a classic cold-start ticking tell-tale we hear weekly.
Signs You Need New Exhaust Manifold
How we match exhaust manifold to your Getz
The Getz reached South Africa as TB (a single generation, pre- and post-facelift), and that alone changes what fits.The facelift changed lighting and front-end trim, so a body or lamp part that fits an early TB may not fit a late one even though the mechanical parts interchange freely.
- 1
Find the generation code on your Getz — it appears on the VIN plate and on the original registration paperwork.
- 2
Confirm the engine family. The Getz ran Alpha 1.3/1.4 and Alpha II 1.6 in this market.
- 3
Send both to us with the exhaust manifold you are after , along with the model year and engine code, and which section has failed. We match it before we quote, not after.
Sourcing note: the Getzshares the Alpha engine family with the Accent LC and MC — which widens where we can look when local stock is thin.
In South Africa the Getz is mostly long out of production but still everywhere on South African roads, which makes the Getz a used-parts car first and a new-parts car second. That is the wear pattern we stock and source against.
Hyundai Getz Exhaust Manifold FAQs
Will exhaust manifold from another Getz fit mine?
Not automatically. The Getz sold in South Africa as TB (a single generation, pre- and post-facelift), and the facelift changed lighting and front-end trim, so a body or lamp part that fits an early TB may not fit a late one even though the mechanical parts interchange freely. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
What should I send you when asking about Getz exhaust manifold?
The VIN is the single most useful thing — a photo of the plate is fine. Failing that, the generation code and the engine code off the block. The Getz ran as TB (a single generation, pre- and post-facelift), so the generation is what narrows the search.
How much does a Hyundai exhaust manifold cost in South Africa?
Real SA sourcing is mostly used through our supplier network. Upgrade tubular manifolds for Hyundai applications are also available. Send your VIN and engine code for a firm quote on the correct part.
What are the symptoms of a cracked exhaust manifold?
Cold-start ticking that fades with warm-up, exhaust smell under bonnet, turbo lag on CRDi/T-GDi engines and a P0420 fault from unmetered air reaching the lambda sensor. 1.6 CRDi and 1.6 T-GDi cast-iron manifolds are the frequent cracker on SA high-mileage cars.
Can a cracked Hyundai exhaust manifold be repaired?
Sometimes — a small surface crack can be welded by an SA specialist, but cast iron is fickle and the repair often fails under thermal cycling. We usually recommend a used OEM replacement or a tubular upgrade for high-mileage 1.6 CRDi or T-GDi engines.
Why does my Hyundai make a ticking sound on cold start?
Classic cracked cast-iron manifold symptom — the crack expands when cold, letting exhaust escape past the seal. As the manifold heats and expands, the crack closes and the noise fades. Listen at the manifold flange on cold start to confirm.
Is it safe to drive with a cracked exhaust manifold?
Short term yes, long term no. Exhaust fumes (including carbon monoxide) can find their way into the cabin, the turbo sees reduced back-pressure on CRDi engines and the cat may overheat. Fix it before your next roadworthy test or long trip.
Get your Getz exhaust manifold matched properly
A part number from the old unit, or simply your VIN, is enough for us to identify the right exhaust manifold for your Getz.