Open: 8:00AM - 5:00PM | Sat: 8:30AM - 12:30PM
Ready to Ship High Demand

Hyundai Getz Right Front Seat

Aftermarket right front seat engineered to slot into the Hyundai Getz. Cross-referenced against OEM specs and dispatched countrywide from our warehouse

Speak to a Specialist
Fitment-Verified Components
Dispatched in 24-48 Hours
Hyundai-Trained Team
Aftermarket Guarantee
Right Front Seat for Hyundai Getz

What Are Hyundai Getz Right Front Seat?

The right front seat is the complete passenger seat assembly with frame, foam, trim, runners and airbag/pre-tensioner wiring. On Hyundais we see frequent airbag warning lights triggered by corroded connectors under the seat, plus torn bolsters and sagging foam on higher-mileage 208s and 308s.

Signs You Need New Right Front Seat

Airbag warning light after passengers get in or out
Torn side bolster on the outer cushion
Seat rocks forward and back on its mounts
Sagging foam — driver sits noticeably lower
Seat heater intermittent or dead (if fitted)
Squeaks or clicks when shifting weight

Common Questions About Hyundai Getz Right Front Seat

Why is my Hyundai airbag warning light on?

Nine times out of ten it's a corroded or loose connector under the front seat controlling the seatbelt pre-tensioner or side airbag. We clean and re-seat the yellow plug and if the fault persists we scan codes before replacing the clockspring or squib.

How much does a used Hyundai front seat cost?

Used Hyundai front seats vary widely by trim — cloth is cheaper, leather and heated trims cost more. Get a free quote through our form with your model, year and trim level and we'll match a seat with intact airbag squib and working runners.

Where is the airbag/seatbelt pre-tensioner connector under a Hyundai seat?

It's the bright yellow plug usually at the front right of the seat base, clipped to the floorpan. Always disconnect the battery and wait 10 minutes before unplugging it — accidentally firing a pre-tensioner on the bench is dangerous and expensive.

Can I swap a front seat between Hyundai models?

Only if the floor mounts and wiring match, which usually means same generation and body style. A i20 MK1 seat won't bolt into an Accent, for example. We check compatibility by VIN and trim code before shipping to avoid mismatch returns.

Do I need to reset the airbag ECU after replacing a Hyundai seat?

Yes — any airbag code logged by the swap needs clearing with a compatible scan tool. We recommend Diagbox or a reputable OBD specialist. Driving with a stored airbag fault means your airbags and pre-tensioners may be disarmed in a crash.

Not Sure Which Right Front Seat Fits Your Getz?

Share your VIN or engine code and our Hyundai team will cross-check the correct right front seat for your exact Getz variant.

Chat with Our Parts Desk