Hyundai H1 Cylinder Heads
Cylinder Heads for the Hyundai H1 — new, used and aftermarket stock, quoted once we know which H1 you are running
What Are Hyundai H1 Cylinder Heads?
The cylinder head sits on top of the engine block, housing the valves, camshafts and combustion chambers. On 1.6 CRDi, 1.6 T-GDi and 2.0 CRDi Hyundais the aluminium head is especially vulnerable to warping or cracking after overheats — an SA tow-strap incident or failed fan clutch is often the trigger.
Signs You Need New Cylinder Heads
Getting the right cylinder heads for your H1 first time
H1 owners are usually surprised by how much turns on the generation code — the original Starex, then the TQ iLoad, iMax and Grand Starex all sold here.Panel van, bus and people-mover bodies on the same TQ base take different rear-end, glass and trim parts, so tell us the body style, not just the model.
Engine families fitted to the SA-market H1:
Hyundai used several engine families in parallel rather than in sequence, so two cars of the same model year can carry completely different internals. The engine code stamped on the block is what a parts desk works from, not the badge on the boot.
Send us the engine code off the block or VIN plate, and whether the car is petrol or CRDi diesel with your enquiry and we will confirm the correct cylinder heads against your car before anything is dispatched.
In South Africa the H1 is mostly shuttle, tour and staff-transport work, which means very high annual mileage and a strong bias towards diesel injection, turbo and clutch components. That is the wear pattern we stock and source against.
Hyundai H1 Cylinder Heads FAQs
Will cylinder heads from another H1 fit mine?
Not automatically. The H1 sold in South Africa as the original Starex, then the TQ iLoad, iMax and Grand Starex, and panel van, bus and people-mover bodies on the same TQ base take different rear-end, glass and trim parts, so tell us the body style, not just the model. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
What should I send you when asking about H1 cylinder heads?
The VIN is the single most useful thing — a photo of the plate is fine. Failing that, the generation code and the engine code off the block. The H1 ran as the original Starex, then the TQ iLoad, iMax and Grand Starex, so the generation is what narrows the search.
How much does a Hyundai cylinder head cost in South Africa?
Real SA pricing is wide — heads run R2,950 to R11,500 depending on engine and condition (new vs recon) and a Hyundai head gasket is around R945 through our supplier network. Send us your VIN and engine code for an exact quote.
What are the symptoms of a cracked cylinder head?
White smoke from the exhaust, coolant loss without visible leak, overheating, milky oil and bubbles in the expansion tank are the classic five. On 1.6 CRDi Hyundais, head cracks often follow an overheat. A combustion-gas test on the coolant confirms it.
How much does it cost to replace a Hyundai head gasket?
The gasket itself is affordable — a multi-fit Hyundai head gasket is around R945 through our supplier network. Labour is substantial, typically 8-12 hours including skimming the head and replacing bolts. Send your VIN for a full quote on parts and labour.
Can a cracked Hyundai cylinder head be repaired?
Sometimes — a small crack in a non-critical area can be stitched or welded by SA engineering specialists in our supplier network. Cracks between valve seats or into the water jacket usually mean replacement. We send heads out for pressure-test before quoting a repair.
Why is there white smoke from my Hyundai exhaust?
Almost always coolant entering the combustion chamber — head gasket, cracked head or cracked block. A sweet, sticky smell confirms it's coolant rather than water vapour. On cold SA mornings a short puff of white vapour is normal; persistent plume is not.
Get your H1 cylinder heads matched properly
A part number from the old unit, or simply your VIN, is enough for us to identify the right cylinder heads for your H1.