Hyundai H1 Indicators
Indicators for the Hyundai H1 — new, used and aftermarket stock, quoted once we know which H1 you are running
What Are Hyundai H1 Indicators?
Indicators are the amber turn-signal bulbs, stalk, flasher relay and BCM (body control module) fuse circuit that show which way you are turning. We see i10 and i20 stalk contacts corrode from cabin damp and Accent LED clusters fail as a sealed unit once a single diode goes.
Signs You Need New Indicators
H1 Indicators: what actually decides fitment
Ordering indicators for a H1 starts with the generation: the original Starex, then the TQ iLoad, iMax and Grand Starex.Panel van, bus and people-mover bodies on the same TQ base take different rear-end, glass and trim parts, so tell us the body style, not just the model.
- 1
Find the generation code on your H1 — it appears on the VIN plate and on the original registration paperwork.
- 2
Confirm the engine family. The H1 ran 2.4 petrol on selected Grand Starex derivatives, D4CB 2.5 CRDi and 2.5 TD on the earlier Starex in this market.
- 3
Send both to us with the indicators you are after , along with the side, the generation, and a photo of the existing unit if you have one. We match it before we quote, not after.
Sourcing note: the H1no Kia equivalent — the H1 is its own commercial platform — which widens where we can look when local stock is thin.
In South Africa the H1 is mostly shuttle, tour and staff-transport work, which means very high annual mileage and a strong bias towards diesel injection, turbo and clutch components. That is the wear pattern we stock and source against.
Hyundai H1 Indicators FAQs
Will indicators from another H1 fit mine?
Not automatically. The H1 sold in South Africa as the original Starex, then the TQ iLoad, iMax and Grand Starex, and panel van, bus and people-mover bodies on the same TQ base take different rear-end, glass and trim parts, so tell us the body style, not just the model. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
What should I send you when asking about H1 indicators?
The VIN is the single most useful thing — a photo of the plate is fine. Failing that, the generation code and the engine code off the block. The H1 ran as the original Starex, then the TQ iLoad, iMax and Grand Starex, so the generation is what narrows the search.
Why are my Hyundai indicators not working?
The usual Hyundai i10 fault is corrosion inside the indicator stalk contacts. On newer models it is a blown bulb, a dry LED module, or a BCM (body control module) fuse. If hazards still work but indicators do not, the stalk or column switch is the prime suspect.
How much does it cost to fix a Hyundai indicator?
A single bulb costs R50-R100 at any SA parts counter. A full stalk switch through Pro Hyundai Spares typically runs R750-R2,400 used, plus about an hour of labour. Get a free quote with your VIN.
How do I replace the indicator stalk on a Hyundai?
Disconnect the battery, pop the steering-column shrouds, unplug the stalk harness and undo the single retaining clip. Swap the unit, reconnect and test every stalk function before refitting the shrouds. Airbag work must stay clear.
Why do Hyundai indicators fail but hazards still work?
Hazards use a direct bypass circuit, so they function even when the stalk switch is dead. A working hazard button with dead indicators points squarely at the column stalk or its connector, not the bulbs or the body control module.
Where can I buy Hyundai indicator parts in South Africa?
Pro Hyundai Spares carries indicator stalks, bulbs, clusters and LED modules for i10, i20, Accent and Creta, with our supplier network as a further source. Send us your VIN for exact-fit matching.
H1 Lighting: related components
Get your H1 indicators matched properly
A part number from the old unit, or simply your VIN, is enough for us to identify the right indicators for your H1.