Open: 8:00AM - 5:00PM | Sat: 8:30AM - 12:30PM
Ready to Ship High Demand

Hyundai H100 Water Pumps

Water Pumps to suit the Hyundai H100, cross-referenced against OEM specification and dispatched countrywide

Speak to a Specialist
Fitment-Verified Components
Dispatched in 24-48 Hours
Hyundai-Trained Team
Aftermarket Guarantee
Water Pumps for Hyundai H100

What Are Hyundai H100 Water Pumps?

The water pump is a critical component of your Hyundai's cooling system, responsible for circulating coolant throughout the engine block, cylinder head and radiator. In modern Hyundai engines like the Gamma (1.6 MPi), T-GDi (turbocharged petrol), CRDi diesel range and the older U-line CRDi diesel units, the water pump maintains optimal operating temperatures by ensuring continuous coolant flow. Most Hyundai water pumps are belt-driven, though some newer models feature electric auxiliary pumps for improved efficiency.

In South African conditions where temperatures can soar above 35°C in summer and engines face demanding stop-start traffic in cities like Johannesburg and Cape Town, a functioning water pump is important. Failure of this component can lead to rapid engine overheating, potentially causing head gasket failure or even complete engine seizure. Hyundai water pumps typically last between 80,000 to 120,000 km, though the timing belt-driven pumps on T-GDi and CRDi engines are often replaced during timing belt service intervals to prevent catastrophic failure.

Signs You Need New Water Pumps

Coolant leaking from the front-center area of the engine, often visible as green or pink fluid pooling under the vehicle
Engine overheating or temperature gauge reading higher than normal, especially in traffic or during hot SA summer days
Whining, grinding, or squealing noise coming from the front of the engine that increases with RPM
Steam coming from under the bonnet and coolant warning light illuminating on the dashboard

What a parts desk needs to know about your H100

What changes across the range

Ordering water pumps for a H100 starts with the generation: Porter, Porter II and the H100 bakkie.

Dropside, tipper and canopy conversions mean the load body is frequently not standard, so load-bed and rear-body parts have to be matched to the conversion rather than to the model.

Worth knowing: the H100no Kia equivalent — a dedicated light-commercial cab-over platform.

What we check on water pumps

  • The generation code, because H100 parts lists split on it
  • The engine family — this H100 was sold with the 2.5 and 2.6 diesels as badged on the SA derivatives
  • Petrol or diesel, and whether the car has air conditioning
  • Whether the car is pre- or post-facelift within its generation

In South Africa the H100 is mostly small-business transport that is loaded to its limit daily, which is why clutch, driveline and front-suspension parts dominate demand rather than trim or electronics. That is the wear pattern we stock and source against.

Hyundai H100 Water Pumps — Questions We Get Asked

Will water pumps from another H100 fit mine?

Not automatically. The H100 sold in South Africa as Porter, Porter II and the H100 bakkie, and dropside, tipper and canopy conversions mean the load body is frequently not standard, so load-bed and rear-body parts have to be matched to the conversion rather than to the model. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.

Which engines did the South African H100 come with?

SA-market cars ran the 2.5 and 2.6 diesels as badged on the SA derivatives. The code stamped on the block is what we work from — the badge on the boot is not reliable on its own.

What does a water pump replacement cost on a Hyundai in South Africa?

Water pump replacement for most Hyundai models costs between R2,500 and R6,500 including parts and labour. The pump itself ranges from R800 to R2,200 depending on your model, while labour adds R1,500 to R4,000. Where the pump sits behind the timing drive the figure goes up, because getting to it is most of the job.

Should the water pump be done with the timing belt?

Where the pump is driven by the timing belt, yes — and that is engine-dependent on Hyundai rather than universal, so confirm which arrangement yours uses before booking. When it does apply, doing both together saves around R3,000 in labour, because the belt has to come off to reach the pump either way. A pump that fails a month after a belt job means paying for the whole job twice.

OEM or aftermarket water pump?

OEM Hyundai water pumps cost R1,800 to R2,200 and give you guaranteed fitment. Quality aftermarket brands such as Saleri, Hepu or SKF range from R800 to R1,400 and are generally reliable. What we would avoid is the very cheap end, under R600 — those fail early, and on a part that lives behind the timing drive the labour to redo it dwarfs whatever you saved.

How long does a water pump last in South African conditions?

Typically 80,000 to 120,000 km or 5 to 7 years under normal use. Sustained highway running in Limpopo heat, a diet of short trips in coastal humidity, or neglected coolant all pull that down. Coolant changes every 60,000 km are the cheapest thing you can do to reach the top of that range rather than the bottom.

Can I drive a Hyundai with a failing water pump?

No — and this is one of the few places we would say that flatly. Overheating does its damage in minutes, not kilometres, and the bill at the end is warped heads, a blown head gasket or a seized engine at R40,000+ to repair. If it is overheating or leaking, stop, let it cool and arrange a tow. Driving it to the workshop is how a pump becomes an engine.

Not sure which water pumps fits your H100?

Send us your VIN or the engine code off the block and our Hyundai desk will cross-check the correct water pumps for your exact H100 derivative.

Chat with Our Parts Desk