Hyundai i10 Pistons

Not automatically. The i10 sold in South Africa as PA, then the Grand i10 BA, then AI3, and the original PA i10 and the later Grand i10 are separate platforms with separate parts catalogues — "i10" on its own is not enough to order from. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.

We work backwards from the VIN: generation first, then engine family, then whether the car is pre- or post-facelift within that generation. On the i10 specifically, the original PA i10 and the later Grand i10 are separate platforms with separate parts catalogues — "i10" on its own is not enough to order from.

Single Hyundai pistons run R2,150-R2,300 through our supplier network, which also carries performance alternatives. A full set of four plus rings and bearings typically lands at R9,450-R14,550 before labour.

Blue start-up smoke, a metallic knock that fades once warm and oil use climbing past 1L per service are the three main signs. A compression test showing one or more low cylinders seals the diagnosis.

A full rebuild including pistons, rings, bearings, gaskets and machine work lands at R36,400-R73,500 through an SA specialist. A replacement used engine through Pro Hyundai Spares often costs less and carries a 3-month warranty.

A cold knock that disappears warm usually points at worn piston skirts. A hot knock that gets louder with revs is more likely rod bearings. Either needs the sump off at minimum. Ignoring it turns a rebuild into a scrap engine.

In theory yes, but you still need the head off, sump down and cylinders honed. Skilled builders do a part rebuild, but most SA indies bundle it with bearings and gaskets since the labour is already there. Price the rebuild against a used engine.