Hyundai i20 Struts
Whether your i20 is an early or late build, we match the struts to your derivative rather than to the badge
What Are Hyundai i20 Struts?
Struts are the complete suspension units combining the damper, coil spring and top mount, usually on the front of your Hyundai and increasingly on the rear too. On SA roads we see struts leak, bounce and clunk by 80,000 to 120,000km on i20, Accent and Tucson models — pothole damage accelerates it.
Signs You Need New Struts
i20 Struts: what actually decides fitment
Ordering struts for a i20 starts with the generation: PB, then GB, then the current BC3.The PB and GB are different cars underneath despite the shared badge, so a part listed simply as "i20" is not automatically the right one — the generation code decides it.
- 1
Find the generation code on your i20 — it appears on the VIN plate and on the original registration paperwork.
- 2
Confirm the engine family. The i20 ran Kappa 1.2, Gamma 1.4 and Kappa 1.0 T-GDi (N Line) in this market.
- 3
Send both to us with the struts you are after , along with the generation code and whether the car is front- or all-wheel drive. We match it before we quote, not after.
Sourcing note: the i20shares its Kappa and Gamma engine families with the Kia Rio — which widens where we can look when local stock is thin.
In South Africa the i20 is mostly a high-mileage commuter hatch that spends its life in stop-start city traffic, which is why wear items move faster on an i20 than on almost anything else Hyundai sells here. That is the wear pattern we stock and source against.
Before You Order i20 Struts
Will struts from another i20 fit mine?
Not automatically. The i20 sold in South Africa as PB, then GB, then the current BC3, and the PB and GB are different cars underneath despite the shared badge, so a part listed simply as "i20" is not automatically the right one — the generation code decides it. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
How do you check struts actually fits a i20?
We work backwards from the VIN: generation first, then engine family, then whether the car is pre- or post-facelift within that generation. On the i20 specifically, the PB and GB are different cars underneath despite the shared badge, so a part listed simply as "i20" is not automatically the right one — the generation code decides it.
How do I test whether my Hyundai needs struts?
Push down sharply on each corner and let go. A healthy strut settles in one rebound; a worn one carries on bouncing two or three times. Back that up with the visual — oil weeping down the strut body is the end of the argument. Nose-dive under braking and clunking on rough roads point the same way.
What do struts cost for a Hyundai in South Africa?
Hyundai struts run from around R315, ranging R149 to R4,500 depending on model and specification through our supplier network. Labour is the bigger variable — a front pair takes around two hours. Note that front geometry changed within model names on Hyundai, so send the generation code with your enquiry.
Do struts need doing in pairs on a Hyundai?
Yes — both front or both rear together. A fresh strut alongside a worn one unbalances the axle and makes the car pull under braking, which is a worse outcome than the wear you started with. Budget for pairs from the outset.
Is a wheel alignment necessary after fitting struts?
Yes, and it is not an upsell. Unbolting the strut-to-knuckle joint disturbs camber, and a fresh spring changes ride height, which shifts toe. Have a four-wheel alignment done straight after fitting — skipping it wears a new set of tyres out within 10,000km.
How long do struts last on South African roads?
Expect 80,000 to 120,000km before wear is noticeable, and less than that if the car lives on the coast, on gravel, or with a loaded boot. We inspect for weeping, play and the bounce test rather than replacing purely on the odometer, because the mileage figure is the least reliable part of the picture.
Let us confirm the struts before you buy
Photos of the old part and your VIN are usually all we need. We confirm the struts against your i20 before quoting, not after.