Hyundai i20 Tie Rods
Tie Rods to suit the Hyundai i20, cross-referenced against OEM specification and dispatched countrywide
What Are Hyundai i20 Tie Rods?
Tie rods carry rack movement out to the wheel: an inner rod threaded into the rack itself, and an outer end at the knuckle. Which rack you have changes the part. The older hydraulically assisted Hyundais — the Getz, the earlier Accent and Atos, the Terracan — use a different arrangement to the newer electrically assisted cars where the motor sits on the column or the rack. Outer ends nearly always go first, and they announce themselves: the boot splits, the grease escapes, and the joint knocks on lock. Once the boot is open the clock is running, whatever the mileage says.
Signs You Need New Tie Rods
How we match tie rods to your i20
i20 owners are usually surprised by how much turns on the generation code — PB, then GB, then the current BC3 all sold here.The PB and GB are different cars underneath despite the shared badge, so a part listed simply as "i20" is not automatically the right one — the generation code decides it.
- 1
Find the generation code on your i20 — it appears on the VIN plate and on the original registration paperwork.
- 2
Confirm the engine family. The i20 ran Kappa 1.2, Gamma 1.4 and Kappa 1.0 T-GDi (N Line) in this market.
- 3
Send both to us with the tie rods you are after , along with the generation code and whether the car is front- or all-wheel drive. We match it before we quote, not after.
Sourcing note: the i20shares its Kappa and Gamma engine families with the Kia Rio — which widens where we can look when local stock is thin.
In South Africa the i20 is mostly a high-mileage commuter hatch that spends its life in stop-start city traffic, which is why wear items move faster on an i20 than on almost anything else Hyundai sells here. That is the wear pattern we stock and source against.
Hyundai i20 Tie Rods — Questions We Get Asked
Will tie rods from another i20 fit mine?
Not automatically. The i20 sold in South Africa as PB, then GB, then the current BC3, and the PB and GB are different cars underneath despite the shared badge, so a part listed simply as "i20" is not automatically the right one — the generation code decides it. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
Which engines did the South African i20 come with?
SA-market cars ran Kappa 1.2, Gamma 1.4, Kappa 1.0 T-GDi (N Line). The code stamped on the block is what we work from — the badge on the boot is not reliable on its own.
Inner or outer tie rod — which has gone?
The outer, usually. It screws onto the inner and connects to the wheel knuckle, and it is exposed, so its ball joint boot splits and the grease escapes. Inners thread into the rack under the rubber gaiter and generally only fail once that gaiter has torn and let dirt in. Two different parts and two different jobs.
How do I check a tie rod end on a Hyundai?
Grab the tyre at 9 and 3 o'clock and rock it firmly. Play with a knock means an outer tie rod, an inner CV joint or a lower ball joint — the test narrows it to three, and a hoist inspection settles which. Supporting symptoms are a clunk on turns, feathered front tyre wear and a squeak at parking speeds.
What does a tie rod end cost for a Hyundai?
Our supplier network stocks Hyundai Getz, Accent and Tucson right-hand tie rod ends from around R240. Do them in pairs. Request a free quote with your model and generation for both-sides parts plus fitting and the alignment.
Is a worn tie rod safe to drive on?
At low speed for a short time, yes. Beyond that, no — a worn tie rod can separate at the ball joint, and losing steering on one wheel at motorway speed is a crash rather than a breakdown. Book it within a week of noticing the clunk, not within a month.
Does the car need aligning afterwards?
Always. The tie rod sets the toe angle, so disturbing it means a four-wheel alignment to reset. Skip it and the new tyres are scrubbed out within weeks and the car pulls constantly. Build the alignment into the quote from the start rather than treating it as optional.
Not sure which tie rods fits your i20?
Send us your VIN or the engine code off the block and our Hyundai desk will cross-check the correct tie rods for your exact i20 derivative.