Hyundai ix35 Control Arms
Control Arms to suit the Hyundai ix35, cross-referenced against OEM specification and dispatched countrywide
What Are Hyundai ix35 Control Arms?
Control arms are critical suspension components in your Hyundai that connect the vehicle's chassis to the wheel hub assembly, allowing controlled vertical movement while maintaining proper wheel alignment. In South African Hyundai models like the i20, Tucson, Creta and Sonata, control arms work constantly to absorb impacts from potholes, speed bumps and uneven road surfaces while ensuring stable handling. Whether your Hyundai is equipped with a Gamma petrol, T-GDi turbocharged, or CRDi/U-line CRDi diesel engine, the control arms bear significant loads during acceleration, braking and cornering.
In South Africa's diverse driving conditions—from Johannesburg's potholed streets to coastal highways and gravel roads—control arms endure considerable stress. Each control arm contains bushings (rubber or polyurethane mounts) and typically connects to a ball joint, both of which wear over time. Failed control arms compromise steering precision, tire wear and overall safety. Regular inspection is crucial, particularly for vehicles frequently driven on rough SA roads or those exceeding 80,000 km.
Signs You Need New Control Arms
How we match control arms to your ix35
What changes across the range
ix35 owners are usually surprised by how much turns on the generation code — LM all sold here.
Because the ix35 and the LM Tucson are one vehicle under two names, parts listed for either will usually interchange — worth knowing when one listing is dry and the other is not.
Worth knowing: the ix35mechanically the same vehicle as the LM-generation Tucson, and a close relative of the Kia Sportage SL.
What we check on control arms
- •The generation code, because ix35 parts lists split on it
- •The engine family — this ix35 was sold with Theta II 2.0 and R-line 2.0 CRDi
- •The generation code and whether the car is front- or all-wheel drive
- •Whether the car is pre- or post-facelift within its generation
In South Africa the ix35 is mostly sold in big numbers as a mid-size family SUV and now firmly in the second- and third-owner phase, where turbo, injector and body-panel demand peaks. That is the wear pattern we stock and source against.
Hyundai ix35 Control Arms — Questions We Get Asked
Will control arms from another ix35 fit mine?
Not automatically. The ix35 sold in South Africa as LM, and because the ix35 and the LM Tucson are one vehicle under two names, parts listed for either will usually interchange — worth knowing when one listing is dry and the other is not. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
Which engines did the South African ix35 come with?
SA-market cars ran Theta II 2.0, R-line 2.0 CRDi. The code stamped on the block is what we work from — the badge on the boot is not reliable on its own.
How much does it cost to replace Hyundai control arms in South Africa?
Control arm replacement for Hyundai models typically costs between R1,550-R4,350 per side including parts and labour, depending on your model and whether you choose OEM or aftermarket parts. Front control arms for an i20 or Tucson generally range R850-R1,900 each, while Creta and Sonata models may cost R1,200-R2,600 per arm. Labour adds approximately R850-R1,450 depending on your workshop and location.
How long do Hyundai control arms last in South African conditions?
Under normal SA driving conditions, Hyundai control arms typically last 100,000-150,000 km, though bushings may wear sooner on poorly maintained roads. Vehicles frequently driven on gravel, potholed urban streets, or overloaded may require replacement as early as 60,000-80,000 km. Regular suspension inspections during services help catch wear before safety is compromised.
Can I replace just the control arm bushings instead of the entire arm?
Yes, control arm bushings can often be replaced separately on many Hyundai models, costing R300-R750 per bushing plus labour. However, if the ball joint is integrated or the arm itself is bent or cracked, full replacement is necessary. Many mechanics recommend replacing the complete arm (R850-R2,000) to avoid repeated labour costs, especially on higher-mileage vehicles.
Should I replace both control arms at the same time?
While not always mandatory, replacing both left and right control arms simultaneously is recommended for balanced handling and even wear. If one arm has failed, the opposite side has endured similar stress and mileage. Replacing both ensures symmetrical suspension geometry and avoids a second workshop visit shortly after, saving on labour costs in the long run.
Do Hyundai Tucson and Creta models use the same control arms?
No, the Tucson and Creta use different control arm designs due to their distinct platforms and suspension geometry. The Creta, being larger and heavier, requires more robust arms with different mounting points and dimensions. Always verify parts compatibility using your VIN number or consult your Hyundai dealer to ensure correct fitment for your specific model and year.
Not sure which control arms fits your ix35?
Send us your VIN or the engine code off the block and our Hyundai desk will cross-check the correct control arms for your exact ix35 derivative.