Open: 8:00AM - 5:00PM | Sat: 8:30AM - 12:30PM
In Stock

Hyundai Mighty Tie Rods

We source tie rods for every Mighty generation sold in South Africa, then check the fit against your VIN before it leaves the warehouse

Speak to a Specialist
Fitment-Verified Components
Dispatched in 24-48 Hours
Hyundai-Trained Team
Aftermarket Guarantee
Tie Rods for Hyundai Mighty

What Are Hyundai Mighty Tie Rods?

Tie rods carry rack movement out to the wheel: an inner rod threaded into the rack itself, and an outer end at the knuckle. Which rack you have changes the part. The older hydraulically assisted Hyundais — the Getz, the earlier Accent and Atos, the Terracan — use a different arrangement to the newer electrically assisted cars where the motor sits on the column or the rack. Outer ends nearly always go first, and they announce themselves: the boot splits, the grease escapes, and the joint knocks on lock. Once the boot is open the clock is running, whatever the mileage says.

Signs You Need New Tie Rods

Clunk from the front when turning the steering
Uneven or feathered tyre wear on the front
Steering feels loose or wandery at motorway speed
Squeak at low-speed lock-to-lock
Vibration through the steering wheel
Split rubber boot visible on the tie rod end

Before you order tie rods for a Mighty

Does one tie rods listing cover every Mighty?

No. Ordering tie rods for a Mighty starts with the generation: the SA-market light-truck range including the EX8.These are chassis-cab trucks bodied after sale, so the cab and driveline come from Hyundai while the load body usually does not — tell us which of the two the part belongs to.

Which engine is in my Mighty?

SA-market cars were sold with the 2.5 turbo-diesel and 3.9 diesel as badged on the SA derivatives. The code stamped on the block settles it — the badge on the boot does not.

What do you need from me to quote tie rods?

The generation code and whether the car is front- or all-wheel drive. South African road surfaces punish suspension harder than the markets these cars were tuned for, and the SUVs in the range carry noticeably different rear geometry between two-wheel- and all-wheel-drive derivatives.

In South Africa the Mighty is mostly distribution and delivery work where downtime is lost income, so demand is overwhelmingly for driveline, clutch and braking parts. That is the wear pattern we stock and source against.

Mighty Tie Rods: Common Questions

Will tie rods from another Mighty fit mine?

Not automatically. The Mighty sold in South Africa as the SA-market light-truck range including the EX8, and these are chassis-cab trucks bodied after sale, so the cab and driveline come from Hyundai while the load body usually does not — tell us which of the two the part belongs to. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.

Can you source tie rods for the Mighty if local stock is dry?

Usually, yes. The Mighty no passenger-car equivalent — a purpose-built light commercial chassis, which gives us a second catalogue to search when Hyundai-listed stock runs out. We will tell you what we are quoting rather than leaving you to guess.

Inner or outer tie rod — which has gone?

The outer, usually. It screws onto the inner and connects to the wheel knuckle, and it is exposed, so its ball joint boot splits and the grease escapes. Inners thread into the rack under the rubber gaiter and generally only fail once that gaiter has torn and let dirt in. Two different parts and two different jobs.

How do I check a tie rod end on a Hyundai?

Grab the tyre at 9 and 3 o'clock and rock it firmly. Play with a knock means an outer tie rod, an inner CV joint or a lower ball joint — the test narrows it to three, and a hoist inspection settles which. Supporting symptoms are a clunk on turns, feathered front tyre wear and a squeak at parking speeds.

What does a tie rod end cost for a Hyundai?

Our supplier network stocks Hyundai Getz, Accent and Tucson right-hand tie rod ends from around R240. Do them in pairs. Request a free quote with your model and generation for both-sides parts plus fitting and the alignment.

Is a worn tie rod safe to drive on?

At low speed for a short time, yes. Beyond that, no — a worn tie rod can separate at the ball joint, and losing steering on one wheel at motorway speed is a crash rather than a breakdown. Book it within a week of noticing the clunk, not within a month.

Does the car need aligning afterwards?

Always. The tie rod sets the toe angle, so disturbing it means a four-wheel alignment to reset. Skip it and the new tyres are scrubbed out within weeks and the car pulls constantly. Build the alignment into the quote from the start rather than treating it as optional.

Tell us which Mighty you have

The Mighty sold here as the SA-market light-truck range including the EX8, and they do not share one parts list. Give us the generation code and we will do the rest.

Chat with Our Parts Desk