Open: 8:00AM - 5:00PM | Sat: 8:30AM - 12:30PM
In Stock

Hyundai Santa Fe Bushings

Bushings to suit the Hyundai Santa Fe, cross-referenced against OEM specification and dispatched countrywide

Speak to a Specialist
Fitment-Verified Components
Dispatched in 24-48 Hours
Hyundai-Trained Team
Aftermarket Guarantee
Bushings for Hyundai Santa Fe

What Are Hyundai Santa Fe Bushings?

Bushes are the rubber or polyurethane isolators sitting between the suspension arms and the shell — control-arm, anti-roll-bar, subframe and engine-mount bushes all count. Where Hyundai bush sourcing gets interesting is that the front geometry changed within model names rather than between them: the LM and TL Tucson do not share arms, and the Getz TB, Accent LC and Accent RB are three different front ends despite living in the same showroom for years. Give us the generation code and the bush becomes a five-minute lookup instead of a guess.

Signs You Need New Bushings

Clunking over bumps from the front or rear suspension
Vague, wandering steering that fights tramlines
Uneven front tyre wear despite recent alignment
Clonk on gear take-up from worn engine-mount bushes
Visible cracking or splits in the rubber
Car sits lower or leans on one side

What a parts desk needs to know about your Santa Fe

What changes across the range

Sold here across SM, CM, DM and TM, the Santa Fe is not one car for parts purposes — it is several.

Five- and seven-seat derivatives differ well beyond the third-row seat itself — floor pan, trim, glass and rear HVAC parts all follow the seating configuration.

Worth knowing: the Santa Fea platform relative of the Kia Sorento across several generations.

What we check on bushings

  • The generation code, because Santa Fe parts lists split on it
  • The engine family — this Santa Fe was sold with Delta 2.7 V6 (SM), 2.2 CRDi (CM) and R-line 2.2 CRDi (DM, TM)
  • The generation code and whether the car is front- or all-wheel drive
  • Whether the car is pre- or post-facelift within its generation

In South Africa the Santa Fe is mostly the tow car of the range, so cooling, driveline and rear-suspension components carry loads the same parts never see on a lighter Hyundai. That is the wear pattern we stock and source against.

Hyundai Santa Fe Bushings — Questions We Get Asked

Will bushings from another Santa Fe fit mine?

Not automatically. The Santa Fe sold in South Africa as SM, CM, DM and TM, and five- and seven-seat derivatives differ well beyond the third-row seat itself — floor pan, trim, glass and rear HVAC parts all follow the seating configuration. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.

Which engines did the South African Santa Fe come with?

SA-market cars ran Delta 2.7 V6 (SM), 2.2 CRDi (CM), R-line 2.2 CRDi (DM, TM). The code stamped on the block is what we work from — the badge on the boot is not reliable on its own.

What are the symptoms of worn Hyundai bushings?

Clunks over bumps, wandering steering, uneven tyre wear and a clonk when you engage gear are the classics. Hyundai Forums documents the issue across Getz, i20, Accent, Sonata, Tucson and Creta — the front lower control-arm rear bush is the headline failure point.

How much does it cost to replace bushings on a Hyundai?

Parts span a wide range — budget rubber from around R150 up to polyurethane kits at R2,600 at SA pricing. Labour depends on location; subframe bushings are an hour each, engine mounts two to three. Send your VIN for a parts quote.

How long do Hyundai suspension bushings last?

Front control-arm rubber bushes typically last 80,000 to 140,000 km in SA conditions. Rear trailing-arm bushes last longer. Potholes and heavy loads shorten life dramatically; if you've hit a big pothole, check the bushes regardless of mileage.

Why does my Hyundai make a clunking noise over bumps?

Worn control-arm or anti-roll-bar bushes are the top suspects, especially on Getz, i20, Accent and Creta. Broken drop links and top-mount bearings mimic the symptom. We start with a hoist check of all front bushings — it's a ten-minute diagnosis.

Should I replace bushings with rubber or polyurethane?

OEM rubber is quieter and cheaper — R150-ish at SA retail. Polyurethane is stiffer, lasts longer and transmits more road noise — an i20 N owner might prefer it, a daily Tucson driver will not. For typical SA daily use we recommend OEM-spec rubber.

Not sure which bushings fits your Santa Fe?

Send us your VIN or the engine code off the block and our Hyundai desk will cross-check the correct bushings for your exact Santa Fe derivative.

Chat with Our Parts Desk