Open: 8:00AM - 5:00PM | Sat: 8:30AM - 12:30PM
Ready to Ship High Demand

Hyundai Santa Fe Springs

We source springs for every Santa Fe generation sold in South Africa, then check the fit against your VIN before it leaves the warehouse

Speak to a Specialist
Fitment-Verified Components
Dispatched in 24-48 Hours
Hyundai-Trained Team
Aftermarket Guarantee
Springs for Hyundai Santa Fe

What Are Hyundai Santa Fe Springs?

Springs are the steel coils that support the car's weight and absorb bump energy, working alongside the dampers. On Hyundais we see broken coil springs on the i20 and Accent where SA's potholed roads fatigue the metal — usually snapping at the bottom coil with a loud clunk.

Signs You Need New Springs

Clunk or bang over bumps or speed humps
Car sitting lower on one corner
Uneven tyre wear
Loose or wandering steering feel
Visible broken coil when the wheel is turned
Scraping sound at full suspension compression

Santa Fe generations and springs — the short version

On the Santa Fe, SM, CM, DM and TM are all in circulation locally, and they do not share one parts list.Five- and seven-seat derivatives differ well beyond the third-row seat itself — floor pan, trim, glass and rear HVAC parts all follow the seating configuration.

Engine families fitted to the SA-market Santa Fe:

Delta 2.7 V6 (SM)2.2 CRDi (CM)R-line 2.2 CRDi (DM, TM)

South African road surfaces punish suspension harder than the markets these cars were tuned for, and the SUVs in the range carry noticeably different rear geometry between two-wheel- and all-wheel-drive derivatives.

Send us the generation code and whether the car is front- or all-wheel drive with your enquiry and we will confirm the correct springs against your car before anything is dispatched.

In South Africa the Santa Fe is mostly the tow car of the range, so cooling, driveline and rear-suspension components carry loads the same parts never see on a lighter Hyundai. That is the wear pattern we stock and source against.

Santa Fe Springs: Common Questions

Will springs from another Santa Fe fit mine?

Not automatically. The Santa Fe sold in South Africa as SM, CM, DM and TM, and five- and seven-seat derivatives differ well beyond the third-row seat itself — floor pan, trim, glass and rear HVAC parts all follow the seating configuration. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.

Can you source springs for the Santa Fe if local stock is dry?

Usually, yes. The Santa Fe a platform relative of the Kia Sorento across several generations, which gives us a second catalogue to search when Hyundai-listed stock runs out. We will tell you what we are quoting rather than leaving you to guess.

How do I spot a broken coil spring on a Hyundai?

A sudden clunk over potholes, the car sitting down on one corner, uneven tyre wear and sometimes a scrape on full bump. Turn the steering lock-to-lock and look into the arch — a broken spring is usually visible at the bottom coil, which makes this one of the few suspension faults you can confirm yourself in a minute.

Is it safe to drive a Hyundai with a broken spring?

Briefly, at low speed, to get home or to a workshop. Not beyond that — the broken coil can perforate a tyre and damage the strut, and the handling is already compromised. Book it in within a day or two rather than a week.

Why do springs break on South African roads specifically?

Potholes and unsealed shoulders load a spring in ways the road it was designed for never did, and a car that habitually carries weight in the boot settles faster on that axle. It is the single most common suspension failure we see on cars that live outside the metros.

What does a coil spring cost for a Hyundai?

Our SA supplier network stocks Hyundai coil-spring replacements and they are typically inexpensive parts. Labour is the bigger variable, since strut assembly removal takes about an hour a side. Request a free quote with your model and generation for an all-in figure.

Do Hyundai springs have to be replaced in pairs?

On the same axle, yes. A fresh spring next to a settled one leaves the car sitting unevenly and handling worse than before you started. The labour is already committed once the corner is apart, so doing both is the cheaper decision as well as the correct one. If one corner sits low, compare ride height with a tape measure — anything more than 10mm difference warrants a swap.

Tell us which Santa Fe you have

The Santa Fe sold here as SM, CM, DM and TM, and they do not share one parts list. Give us the generation code and we will do the rest.

Chat with Our Parts Desk