Hyundai Tiburon Brake Lines
Brake Lines to suit the Hyundai Tiburon, cross-referenced against OEM specification and dispatched countrywide
What Are Hyundai Tiburon Brake Lines?
Brake lines carry pressurised DOT 4 fluid from your Hyundai's master cylinder to each caliper — rigid steel pipes along the chassis, flexible rubber hoses at the wheels. On Getz, i20 and Accent models we see corrosion where the steel line runs near the rear axle, worse on coastal cars.
Signs You Need New Brake Lines
Getting the right brake lines for your Tiburon first time
Sold here across the SA-market coupe in 2.0 and 2.7 V6 form, the Tiburon is not one car for parts purposes — it is several.The coupe body panels, glass and lighting are Tiburon-only, even where the engine and gearbox parts interchange with the Elantra of the same period.
Engine families fitted to the SA-market Tiburon:
Disc diameter on a Hyundai tracks the derivative rather than the model — a 1.6 and a turbo version of the same car frequently run different front brakes, and N Line derivatives differ again.
Send us the derivative and whether the car has been fitted with non-standard wheels, which can rule out some caliper and disc combinations with your enquiry and we will confirm the correct brake lines against your car before anything is dispatched.
In South Africa the Tiburon is mostly an enthusiast car with an active owner community, where the split between shared mechanical parts and unique body parts defines what is easy to find. That is the wear pattern we stock and source against.
Hyundai Tiburon Brake Lines — Questions We Get Asked
Will brake lines from another Tiburon fit mine?
Not automatically. The Tiburon sold in South Africa as the SA-market coupe in 2.0 and 2.7 V6 form, and the coupe body panels, glass and lighting are Tiburon-only, even where the engine and gearbox parts interchange with the Elantra of the same period. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
Which engines did the South African Tiburon come with?
SA-market cars ran Beta II 2.0, Delta 2.7 V6. The code stamped on the block is what we work from — the badge on the boot is not reliable on its own.
How much does it cost to replace a Hyundai brake line?
A single flexi hose is a budget repair, sourced through our SA supplier network. Full rigid-line replacement for a corroded Getz/i20 rear line is a bigger job, typically three to four hours. Send your VIN for a free quote.
What are the symptoms of a leaking brake line?
A spongy pedal is the earliest sign, followed by a dropping fluid level and visible drips under the wheel or along the chassis. JustAnswer has a long-running i20 brake-fluid-leak thread — usually a flexi hose or the rear line near the axle.
Is it safe to drive with a leaking brake line?
No — and we will not mince words here. A leaking line can fail completely under hard braking, leaving you with no front or no rear brakes. Stop driving the car, top up the reservoir and get it towed to a workshop or our recommended installer.
Why is my Hyundai brake pedal spongy?
Three main causes: air in the system from a recent repair, old moisture-laden fluid, or a weeping flexi hose ballooning under pressure. On i20s and Cretas we see the rear flexi hoses perish first. A proper bleed plus hose inspection usually diagnoses it.
Where can I buy Hyundai brake lines in South Africa?
We source new flexi hoses and rigid pipe sets nationally through our SA supplier network. Stainless-braided upgrades for i20 N or Accent GT trims are also available. Send us your VIN and wheel position for a same-day quote.
Not sure which brake lines fits your Tiburon?
Send us your VIN or the engine code off the block and our Hyundai desk will cross-check the correct brake lines for your exact Tiburon derivative.