Hyundai Tiburon Rocker Arms
We source rocker arms for every Tiburon generation sold in South Africa, then check the fit against your VIN before it leaves the warehouse
What Are Hyundai Tiburon Rocker Arms?
Rocker arms are the levers that carry camshaft movement across to the valves, riding on hydraulic lash adjusters on most of the modern range. The reason we ask for the engine code rather than the model here is that the valve-train arrangement follows the engine family, not the badge — an Alpha-engined Getz, a Gamma-engined i20 and a Nu-engined Elantra are three different top ends even where the cars sit in the same size class. A cold ticking that fades as the oil warms through is the classic collapsed-adjuster symptom, and nine times out of ten the cause is upstream: oil that is low, old or the wrong grade. Sorting the oil before sorting the parts is not us being difficult, it is us saving you the same job twice.
Signs You Need New Rocker Arms
Getting the right rocker arms for your Tiburon first time
Does one rocker arms listing cover every Tiburon?
No. On the Tiburon, the SA-market coupe in 2.0 and 2.7 V6 form are all in circulation locally, and they do not share one parts list.The coupe body panels, glass and lighting are Tiburon-only, even where the engine and gearbox parts interchange with the Elantra of the same period.
Which engine is in my Tiburon?
SA-market cars were sold with Beta II 2.0 and Delta 2.7 V6. The code stamped on the block settles it — the badge on the boot does not.
What do you need from me to quote rocker arms?
The engine code off the block or VIN plate, and whether the car is petrol or CRDi diesel. Hyundai used several engine families in parallel rather than in sequence, so two cars of the same model year can carry completely different internals. The engine code stamped on the block is what a parts desk works from, not the badge on the boot.
In South Africa the Tiburon is mostly an enthusiast car with an active owner community, where the split between shared mechanical parts and unique body parts defines what is easy to find. That is the wear pattern we stock and source against.
Tiburon Rocker Arms: Common Questions
Will rocker arms from another Tiburon fit mine?
Not automatically. The Tiburon sold in South Africa as the SA-market coupe in 2.0 and 2.7 V6 form, and the coupe body panels, glass and lighting are Tiburon-only, even where the engine and gearbox parts interchange with the Elantra of the same period. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
Can you source rocker arms for the Tiburon if local stock is dry?
Usually, yes. The Tiburon shares core running gear with the Elantra XD, which is the practical route to many mechanical parts, which gives us a second catalogue to search when Hyundai-listed stock runs out. We will tell you what we are quoting rather than leaving you to guess.
What causes rocker arm ticking in a Hyundai engine?
Almost always a collapsed hydraulic lash adjuster not holding oil pressure, usually because oil level is low or the oil is past its service interval. On 1.6 T-GDi engines we see worn follower pads too — often a sign of neglected servicing rather than a design fault.
How much does it cost to replace a Hyundai rocker arm?
Parts and labour depend on the engine — a full rocker set swap on a 1.6 T-GDi is a much bigger job than a single ticking adjuster on a 1.4 petrol. Request a free quote through our form with your engine code for an accurate parts and fitting estimate.
How much is a Hyundai Getz rocker arm in South Africa?
Hyundai Getz 1.4 rocker arms run from around R150 to R250 depending on condition through our supplier network. A full set for the engine works out cheaper per unit. Send us your engine code and we'll match OEM-equivalent parts rather than generic aftermarket.
What are the symptoms of a failing rocker arm?
Persistent ticking from the top of the engine, rough idle, loss of power and sometimes a misfire code on a specific cylinder. Pull the rocker cover and you'll often see one rocker sitting at a different height or with a polished groove on its pad.
Can low oil pressure damage Hyundai rocker arms?
Yes and it's the most common root cause. Hydraulic adjusters need oil pressure to maintain valve clearance — without it they collapse and the rocker hammers the valve. Check level weekly and change oil every 10,000km with the correct Hyundai-spec grade.
Learn More About Hyundai Tiburon Rocker Arms
More Engine Parts that fit the Tiburon
Tell us which Tiburon you have
The Tiburon sold here as the SA-market coupe in 2.0 and 2.7 V6 form, and they do not share one parts list. Give us the generation code and we will do the rest.