Hyundai Tiburon Indicators
Indicators for the Hyundai Tiburon — new, used and aftermarket stock, quoted once we know which Tiburon you are running
What Are Hyundai Tiburon Indicators?
Indicators are the amber turn-signal bulbs, stalk, flasher relay and BCM (body control module) fuse circuit that show which way you are turning. We see i10 and i20 stalk contacts corrode from cabin damp and Accent LED clusters fail as a sealed unit once a single diode goes.
Signs You Need New Indicators
How we match indicators to your Tiburon
Sold here across the SA-market coupe in 2.0 and 2.7 V6 form, the Tiburon is not one car for parts purposes — it is several.The coupe body panels, glass and lighting are Tiburon-only, even where the engine and gearbox parts interchange with the Elantra of the same period.
- 1
Find the generation code on your Tiburon — it appears on the VIN plate and on the original registration paperwork.
- 2
Confirm the engine family. The Tiburon ran Beta II 2.0 and Delta 2.7 V6 in this market.
- 3
Send both to us with the indicators you are after , along with the side, the generation, and a photo of the existing unit if you have one. We match it before we quote, not after.
Sourcing note: the Tiburonshares core running gear with the Elantra XD, which is the practical route to many mechanical parts — which widens where we can look when local stock is thin.
In South Africa the Tiburon is mostly an enthusiast car with an active owner community, where the split between shared mechanical parts and unique body parts defines what is easy to find. That is the wear pattern we stock and source against.
Hyundai Tiburon Indicators FAQs
Will indicators from another Tiburon fit mine?
Not automatically. The Tiburon sold in South Africa as the SA-market coupe in 2.0 and 2.7 V6 form, and the coupe body panels, glass and lighting are Tiburon-only, even where the engine and gearbox parts interchange with the Elantra of the same period. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
What should I send you when asking about Tiburon indicators?
The VIN is the single most useful thing — a photo of the plate is fine. Failing that, the generation code and the engine code off the block. The Tiburon ran as the SA-market coupe in 2.0 and 2.7 V6 form, so the generation is what narrows the search.
Why are my Hyundai indicators not working?
The usual Hyundai i10 fault is corrosion inside the indicator stalk contacts. On newer models it is a blown bulb, a dry LED module, or a BCM (body control module) fuse. If hazards still work but indicators do not, the stalk or column switch is the prime suspect.
How much does it cost to fix a Hyundai indicator?
A single bulb costs R50-R100 at any SA parts counter. A full stalk switch through Pro Hyundai Spares typically runs R750-R2,400 used, plus about an hour of labour. Get a free quote with your VIN.
How do I replace the indicator stalk on a Hyundai?
Disconnect the battery, pop the steering-column shrouds, unplug the stalk harness and undo the single retaining clip. Swap the unit, reconnect and test every stalk function before refitting the shrouds. Airbag work must stay clear.
Why do Hyundai indicators fail but hazards still work?
Hazards use a direct bypass circuit, so they function even when the stalk switch is dead. A working hazard button with dead indicators points squarely at the column stalk or its connector, not the bulbs or the body control module.
Where can I buy Hyundai indicator parts in South Africa?
Pro Hyundai Spares carries indicator stalks, bulbs, clusters and LED modules for i10, i20, Accent and Creta, with our supplier network as a further source. Send us your VIN for exact-fit matching.
Learn More About Hyundai Tiburon Indicators
Tiburon Lighting: related components
Get your Tiburon indicators matched properly
A part number from the old unit, or simply your VIN, is enough for us to identify the right indicators for your Tiburon.