Hyundai Tucson Indicators
Indicators to suit the Hyundai Tucson, cross-referenced against OEM specification and dispatched countrywide
What Are Hyundai Tucson Indicators?
Indicators are the amber turn-signal bulbs, stalk, flasher relay and BCM (body control module) fuse circuit that show which way you are turning. We see i10 and i20 stalk contacts corrode from cabin damp and Accent LED clusters fail as a sealed unit once a single diode goes.
Signs You Need New Indicators
Getting the right indicators for your Tucson first time
Ordering indicators for a Tucson starts with the generation: JM, LM, TL and NX4.The LM Tucson and the ix35 are the same vehicle sold under two names in different markets, so ix35 stock is a legitimate source for LM-generation parts and vice versa.
Engine families fitted to the SA-market Tucson:
Halogen, projector and LED derivatives of the same Hyundai lamp are not interchangeable, and facelift lamps generally will not fit a pre-facelift body without the surrounding panels.
Send us the side, the generation, and a photo of the existing unit if you have one with your enquiry and we will confirm the correct indicators against your car before anything is dispatched.
In South Africa the Tucson is mostly the family SUV that does school runs during the week and gravel-road holiday mileage over December, a duty cycle that is hard on suspension and cooling components. That is the wear pattern we stock and source against.
Hyundai Tucson Indicators — Questions We Get Asked
Will indicators from another Tucson fit mine?
Not automatically. The Tucson sold in South Africa as JM, LM, TL and NX4, and the LM Tucson and the ix35 are the same vehicle sold under two names in different markets, so ix35 stock is a legitimate source for LM-generation parts and vice versa. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.
Which engines did the South African Tucson come with?
SA-market cars ran Beta II 2.0 (JM), Theta II 2.0 (LM), Gamma 1.6 T-GDi (TL), Nu 2.0, R-line 2.0 CRDi (TL). The code stamped on the block is what we work from — the badge on the boot is not reliable on its own.
Why are my Hyundai indicators not working?
The usual Hyundai i10 fault is corrosion inside the indicator stalk contacts. On newer models it is a blown bulb, a dry LED module, or a BCM (body control module) fuse. If hazards still work but indicators do not, the stalk or column switch is the prime suspect.
How much does it cost to fix a Hyundai indicator?
A single bulb costs R50-R100 at any SA parts counter. A full stalk switch through Pro Hyundai Spares typically runs R750-R2,400 used, plus about an hour of labour. Get a free quote with your VIN.
How do I replace the indicator stalk on a Hyundai?
Disconnect the battery, pop the steering-column shrouds, unplug the stalk harness and undo the single retaining clip. Swap the unit, reconnect and test every stalk function before refitting the shrouds. Airbag work must stay clear.
Why do Hyundai indicators fail but hazards still work?
Hazards use a direct bypass circuit, so they function even when the stalk switch is dead. A working hazard button with dead indicators points squarely at the column stalk or its connector, not the bulbs or the body control module.
Where can I buy Hyundai indicator parts in South Africa?
Pro Hyundai Spares carries indicator stalks, bulbs, clusters and LED modules for i10, i20, Accent and Creta, with our supplier network as a further source. Send us your VIN for exact-fit matching.
Learn More About Hyundai Tucson Indicators
Other Lighting for the Hyundai Tucson
Not sure which indicators fits your Tucson?
Send us your VIN or the engine code off the block and our Hyundai desk will cross-check the correct indicators for your exact Tucson derivative.