Hyundai Veloster Flex Pipe

Not automatically. The Veloster sold in South Africa as FS, then JS, and the asymmetric three-door layout means the left and right sides are genuinely not mirror images — door, glass and trim parts must be ordered by side. Send us the generation code off your VIN plate and we will confirm it either way before anything is dispatched.

We work backwards from the VIN: generation first, then engine family, then whether the car is pre- or post-facelift within that generation. On the Veloster specifically, the asymmetric three-door layout means the left and right sides are genuinely not mirror images — door, glass and trim parts must be ordered by side.

It is the braided, corrugated section just behind the manifold or downpipe that absorbs engine movement so the rest of the exhaust does not have to. Because it is the part doing the flexing, it is the part that fatigues — on Getz and Accent CRDi cars it is reliably the first exhaust section to go.

A loud blow or tick that gets worse when you lift off the throttle, exhaust smell reaching the cabin, and vibration you can feel through the floor. Underneath, the braided mesh visibly frays before it fully lets go, so it usually gives you warning if anyone looks.

Once the mesh has torn or the inner corrugated core has cracked, a weld rarely holds — it fails again at the weld boundary within weeks, and you have paid twice. We cut the old section out and weld a fresh flex in. The replacement cost is modest enough that the repair is false economy.

Generic flex pipes run R190 to R850 through our supplier network — the budget end being mild steel and the top end stainless — and Hyundai-specific units are also available. Labour is one to two hours for the cut-and-weld. Ask for a fitted quote rather than a parts price.

It is the first thing to check, because with no flex absorbing engine movement the vibration goes straight into the system and the body. Failed engine mounts and a loose heat shield produce something similar, so get all three looked at on the ramp — the flex inspection itself takes about two minutes.