Hyundai Master Cylinder for Sale in South Africa

Disc diameter on a Hyundai tracks the derivative rather than the model — a 1.6 and a turbo version of the same car frequently run different front brakes, and N Line derivatives differ again. In practice the decision in front of you is whether you need friction material only or the discs as well, which usually comes down to how much the current set has already been skimmed.

The derivative and whether the car has been fitted with non-standard wheels, which can rule out some caliper and disc combinations. With that we can usually confirm the right part the same day, and we will tell you whether we are quoting new, aftermarket or good used stock rather than leaving you to guess.

The pedal tells you. A pedal that sinks slowly to the floor under steady pressure is the master cylinder — the seals are letting fluid bypass the piston internally. A pedal that feels spongy but holds is air in the lines. Losing fluid with nothing leaking outside, plus a brake warning light, puts it beyond much doubt.

Worn internal seals letting fluid slip past the piston instead of pushing it down the lines. The giveaway is that the reservoir stays full, because nothing is escaping the system — it is just going round in circles inside the cylinder. That is why a sinking pedal and a spongy pedal point at two different repairs.

No. This is the one component whose failure mode is the pedal hitting the floor with no braking at all, and there is no safe speed at which to gamble on that. Recover the car to a workshop rather than driving it there.

Budget R2,500-R5,450 at an SA independent workshop including fluid and a full system bleed. The bleed is not optional here — opening the hydraulic circuit means air in the lines, so any quote that leaves it out is not the real number.

Pro Hyundai Spares and our supplier network carry master cylinders for the Getz, i20, Accent and Creta. Send the engine code and generation with your enquiry — braking specification varies by derivative on these cars, so the model name alone is not enough to pull the right part.